Sliding gates

Reliable operation under all conditions

FUNCTIONALITY AND SAFETY

MANUAL AND MOTORISED SLIDING GATES

Features:

• the sliding door is a self-supporting structure, the load-bearing assembly is placed on the foundation using foundation bolts
• the sash moves a few centimetres above the ground and is therefore not obstructed by anything
• depending on the design, the filling consists of profiled steel sections or bars
• The 95×85 mm support rail is fixed to the door leaf, The running rail is manufactured from galvanised sheet without any waste - this unique manufacturing process for one of the most important components of the sliding door
• guarantees efficient, smooth and quiet door travel
• running unit in the rail - 95×85 [mm]
• the door can be mounted on two or three mounting screws

DEVELOPMENT CONDITIONS

Fitting dimensions and their markings needed for correct selection and fitting of the sliding gate - right-hand gate, view from the property.

S_o - width between columns (order dimension)
H - Door leaf height (order dimension)

SLIDING GATE WITH OPERATOR

Drive in the pole - safe, convenient, aesthetically pleasing

The automat located in the steel post of the WIŚNIOWSKI sliding gate is the only such solution on the market.

Instead of external devices, which often fall prey to thieves and disfigure the fence, it is worth ordering a gate with an integrated automatic operator.

The post protects the mechanism from the elements.

In the event of a power outage, the operator can easily be disconnected and the gate opened manually. 

Drive in pole AWSo2000

• mounted in a column of cross-section 120×120 mm
• cover protects the drive against weather, mechanical damage and theft
• the cover-opening lever simultaneously deploys the drive and, after removing the cover, allows access to the drive

 
Option with external drive also available.

MODELS

CORROSION PROTECTION

DURABILITY FOR YEARS

All WIŚNIOWSKI fencing system elements undergo the best anticorrosive protection in the form of galvanising and powder painting. Zinc coating obtained by immersing a chemically cleaned construction in a bath of liquid zinc protects WIŚNIOWSKI fencing system elements against corrosion for decades.

EFFECTIVE PROTECTION

Galvanising is a cost-effective technique both at the manufacturing and operational stages. Galvanised property fences WIŚNIOWSKI do not require surface maintenance for many years. During their service life, there is no need to worry about protecting the elements with expensive agents required for traditional fencing. Galvanised steel is recyclable, does not litter the environment and is not a burden on it.

DUPLEX SYSTEM - DOUBLE PROTECTION

Combining the properties of zinc coating and lacquer coating in the DUPLEX system considerably extends the lifespan of WIŚNIOWSKI fences. Regardless of weather conditions, WIŚNIOWSKI fencing will look attractive all the time. Using the RAL colour palette allows to select a proper colour of polyester protective coating.

TESTED UNDER ALL CONDITIONS

The WIŚNIOWSKI galvanising process is compliant with the European standard PN-EN ISO 1461 which guarantees proper quality of galvanised products. Zinc coating is resistant to high and low temperatures and UV radiation, and owing to these properties provides optimal corrosion protection to steel surfaces.